Showing posts with label DYNAMIC SEALS. Show all posts
Showing posts with label DYNAMIC SEALS. Show all posts

Thursday, 16 June 2016

Oil Seals



Oil Seal:  
As products, oil seals may be simply described as devices that close or seal the spaces between stationary and moving components in mechanical equipment...they prevent lubricant from escaping.  Oil seals, often called grease, fluid or dirt seals, are the vital components of practically every type of machine and vehicle in operation. These seals fulfill an exacting function: they protect all types of precision constructed, close fitting ball, sleeve and roller bearings.

Oil seals are used wherever shafts rotate and bearings require lubrication. In short, a seal is a barrier with three basic functions: 1) Retaining lubricants and liquids; 2) Excluding contaminants; 3) Seal or separate dissimilar fluids or gases.

•  Precision bearings rely on the oil seal to prevent lubricants from escaping the bearings or a specific area.
•  Components of machines rely on the oil seal to prevent abrasives, corrosive moisture and other harmful contaminants from entering the mechanics of the machine.
•  Separation of fluids and gases may completely rely on the seal to prevent inter mixture of two different mediums such as lubricating oil and water.

In a typical application, the oil seal is installed adjacent to a bearing, sealing in or sealing out, as necessary, the various liquids, gases or solids encountered by the particular mechanism.





 The Society of Automotive Engineers (SAE) and the American Society of Testing Materials (ASTM) have developed and adapted a standard to identify component parts that make up an oil seal, as well as terminology and basic lip seal designs.
 


Saturday, 11 June 2016

DYNAMIC SEALS


DYNAMIC SEALS:
•      Compression packing
•      Molded packing
–     Lip type
–     Squeeze type
•      Oil seals
•      Circumferential seals
•      Clearance seals
•      Mechanical seals

COMPRESSION PACKING:



TYPES OF COMPRESSION PACKING'S:


Compression packing’s are made in square or rectangular cross section.

Materials:

(a)        Vegetable Fiber (Plant fiber like cotton)
(b)        Mineral Fiber (Asbestos is the mineral fiber)
(c)        Animal Product (Leather)
(d)       Synthetic Fiber
(e)        Grafoil (flexible graphite)
(f)        Metal               



Qualities of Packing’s:
1.  Packing should not contain anything that can be dissolved, swelled or weakened the fluid.
2.  Be sufficient elastic to absorb any shaft vibration.
3.  If over tightened possess means of becoming free without producing destructive friction & heat.
4.  Do not corrode the shaft or rod.
5. Lose volume slowly to require minimum adjustment and renewal.

Metals
Several metallic material are used for packing
Lead            :    It is used in form of foil. It is used up to 450° F.
Copper        :    Pure copper is used in the form of wire and foil
                         Max. Temp. Limit is up to 1000 ˚F.
Aluminums:    Aluminum foil is generally more flexible than
                         Copper. This also can handle up to 1000 ˚F.
Pure Nickel:  It is made into foil and used mainly in valves handling alkalis or steam at temps. Over 1500 ˚ F.
Monel and Inconel:  These are used as wire reinforcement for asbestos yarns in high pressure high temp. steam gas and oil packing’s.        

MOLDED PACKING'S:     

Type:                 
     
            1. Lip type                     
            2. Squeeze type



LIP TYPE SEALS: Lip type seals are used for reciprocating application.

V-Ring packing:

Used in low and high pressure application.
•         Can be installed on piston as inside packed and in gland box as outside packed.
•         Installed in sets with male & female adapters.
•         Split V-rings are used for easy installation.

V-Ring Packing: