Showing posts with label MOTIONS. Show all posts
Showing posts with label MOTIONS. Show all posts

Monday, 20 June 2016

Steam Traps: Introduction

Steam Traps:



An effective steam trap maximizes the efficiency of a steam system in three ways:
  • It keeps the system filled with dry steam (saturated steam without entrained condensate).
  • It removes by-products (condensate and air) from the system that form insulating barriers that prevent efficient and effective heat transfer.
  • It makes the hot condensate available for recycling, reducing both waterside care and energy costs at the boiler.
·         Mechanical traps operate by using the difference in density between steam and condensate. A float within the trap detects the variance in weight between a gas and a liquid.
·         Thermostatic traps detect the variation in temperature between steam and condensate at the same pressure. The sensing device operates the valve in response to changes in the condensate temperature and pressure.
·         Thermodynamic Traps use volumetrics and pressure differences that occur when water changes state into gas. These changes act upon the valve directly.


Thursday, 16 June 2016

Oil Seals



Oil Seal:  
As products, oil seals may be simply described as devices that close or seal the spaces between stationary and moving components in mechanical equipment...they prevent lubricant from escaping.  Oil seals, often called grease, fluid or dirt seals, are the vital components of practically every type of machine and vehicle in operation. These seals fulfill an exacting function: they protect all types of precision constructed, close fitting ball, sleeve and roller bearings.

Oil seals are used wherever shafts rotate and bearings require lubrication. In short, a seal is a barrier with three basic functions: 1) Retaining lubricants and liquids; 2) Excluding contaminants; 3) Seal or separate dissimilar fluids or gases.

•  Precision bearings rely on the oil seal to prevent lubricants from escaping the bearings or a specific area.
•  Components of machines rely on the oil seal to prevent abrasives, corrosive moisture and other harmful contaminants from entering the mechanics of the machine.
•  Separation of fluids and gases may completely rely on the seal to prevent inter mixture of two different mediums such as lubricating oil and water.

In a typical application, the oil seal is installed adjacent to a bearing, sealing in or sealing out, as necessary, the various liquids, gases or solids encountered by the particular mechanism.





 The Society of Automotive Engineers (SAE) and the American Society of Testing Materials (ASTM) have developed and adapted a standard to identify component parts that make up an oil seal, as well as terminology and basic lip seal designs.
 


Wednesday, 15 June 2016

Pump & Motor Alignment: Part-2: Misalignment




MIS-ALIGNMENTS: Shaft misalignment occurs when the centerlines of rotation of two (or more) machinery shafts are not in line with each other -In more precise terms, shaft misalignment is the deviation of relative shaft position from a collinear axis of rotation measured at the points of power transmission when equipment is running at normal operating conditions.

TYPE OF MIS-ALIGNMENTS: 
  • ·Offset or Parallel misalignment - Occurs when the two shaft center lines are parallel, but not in the same line. They are offset horizontally or vertically (or both), displaced to the left or right, or positioned at different elevations. 
  • Horizontal offset misalignment
  •  Vertical offset misalignment
  • Angular misalignment- The axis of Driven and Driver shaft are at an angle to each other.
  • Vertical angular misalignment
  • Horizontal misalignment
  • Combination misalignment- Occurs when the motor shaft suffers from angular misalignment in addition to parallel misalignment. 




ANGULAR MISALIGNMENT: 




 
 

SYMPTOMS OF MISALIGNMENT: 
 

  • Premature bearing, seal, shaft, or coupling failures.
  • Excessive radial and axial vibration.
  •  High casing temperatures at or near the bearings or high discharge oil temperatures.
  • Excessive amount of oil leakage at the bearing seals.
  • Loose foundation bolts.
  • Loose or broken coupling bolts.
  • Excessive amount of grease on the inside of coupling guard
  • Similar pieces of equipment are vibrating less or seem to have a longer operating life.
  • Unusually high number of coupling failures or they wear quickly.
  • The shafts are breaking (or cracking) at or close to the inboard bearings or coupling hubs.
  • Excessive amounts of grease (or oil) on the inside of the coupling guard.
 
TIR - Total Indicator Reading: Total range of a dial indicator reading when gauging misalignment.

Shaft Run out is the wobble motion produced by a shaft that is not perfectly true and straight. Shaft run out is often abbreviated T.I.R. (Total Indicated Run out).

  

PREREQUISITE OF ALIGNMENT: 

  • Dial gauge mounting clamp.
  • Single dial gauge mounting clamp.
  • Double dial gauge mounting clamp.
  • Spanner set.
  • Dental or plane mirror.
  • Filler gauge.
  • Pre cut shims.
  • Measuring tape.
  • Jacking bolts.
  • Scale.
  • Micrometer.