Showing posts with label VALVES. Show all posts
Showing posts with label VALVES. Show all posts

Monday, 13 June 2016

HYDRAULIC & ELECTRIC VALVE ACTUATORS




Hydraulic actuators: 


  1. —  Construction is similar to Cylinder type actuators.
  2. —  Pressurized oil is used for operation.
  3. —  Used for valves when force required is high.










ELECTRICAL ACTUATORS:  

They are Electro-mechanical devices used for operating valves. They consist of an assembly of a motor, a gear box and its controls.
They can be classified into two types:

1. Rotary
2. Linear

Rotary actuators: 


  1. —  They are actuators having a rotating output shaft.
  2. —  They are commonly used as they do not have any limitation with respect to valve travel.
  3. —  Their use is widespread.

Linear actuators:
•      They are actuators having a reciprocating output shaft.
•      They have a limitation with respect to stroke length (valve travel).
•      Their use is limited.



VALVE ACTUATORS



VALVE ACTUATORS: Valve actuator is a mechanical device fitted on the valve to operate it from remote location (Control room or field panel). 

WHEN IT IS USED?


  1. —  When force required for valve operation is too high for manual operation
  2. —  When manual valve operation time is high.
  3. —  When valve is to be operated frequently.
  4. —  When valve is located in “Inaccessible area”.
  5. —  When valve is ‘Interlocked’ for control.
  6. —  When ‘Remote’ valve operation is needed.

WHAT ARE ITS TYPES?

—  MANUAL

   - Operated MANUALLY by gear box

—  PNEUMATIC

   - Operated by AIR pressure

—  HYDRAULIC

   - Operated by OIL pressure

—  ELECTRICAL

   - Operated by ELECTRIC motor

MANUAL ACTUATORS:


  1. —  They are operated manually by a Hand wheel or a Handle mounted on a gear box.
  2. —  The gear box is mounted on the valve which multiplies the torque.
  3. —  Valve can be positioned accurately.
  4. —  Normally used with butterfly valves.

PNEUMATIC ACTUATORS:


  1. —  They are operated by air pressure.
  2. —  They are direct acting.
  3. —  They are linear actuators.
  4. —  They may be of following two types:


(I)                Piston type
(II)             Diaphragm type

PISTON TYPE ACTUATORS:


  1. —  They consist of a Piston and Cylinder arrangement.
  2. —  Air pressure is used for piston movement.
  3. —  Piston rod is attached to valve stem.
  4. —  Used only on Motorized Valves
  5. —  May be either Single acting or Double acting type
 






DIAPHRAGM ACTUATORS:

•      They consist of a Diaphragm and spring arrangement.
•      Air pressure is used on the diaphragm for stem movement.
•      Used on Control Valves
•      May be either Forward acting or Reverse acting type.